基于全球分布的地震观测数据估计0S0模态的特征频率及品质因子     

周丰森  王迪晋  旦增 《大地测量与地球动力学》2019,39(10):1013-1016

选取2011-03-11日本MW9.3地震后全球地震台站记录的约220 h波形数据，基于一定的判断准则，筛选出质量较高的448个垂向观测数据，采用频域AR方法对0S0模态的特征频率和品质因子进行估值，并以信噪比为权重进行加权平均，得到特征频率f=0.814 658 4±5.3×10-7，品质因子Q=5 586±12。该结果与已有研究成果相比精度更高，有助于约束现有地球介质密度和衰减模型，使其更接近真实地球。  相似文献   

云南武定县朱家坝尾矿库渗漏原因浅析     

周南  李卿  喻涌麒 《云南地质》2020,(1):118-124

位于云南省楚雄州武定县朱家坝新建尾矿库,在使用过程中,该尾矿库下游一泉水点出现尾矿粉渗漏污染,通过地质勘查,发现该尾矿库下伏昆阳群绿汁江组(Pt2lz)的白云岩基底,存在一隐伏断层,渗漏污染原因与该断层及其形成的岩溶裂隙有直接的关系。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

基于AUKF的框架结构离线模型更新混合试验方法     

陈凡  郭玉荣 《地震工程与工程振动》2020,(1):162-170

模型更新混合试验在传统混合试验方法的基础上更新与试验构件具有相同恢复力特性的构件,扩展了混合试验方法的应用范围。本文旨在提高模型更新混合试验的精度,降低试验的成本并简化模型更新混合试验方法的流程。自适应UKF(AUKF)算法在传统UKF的基础上加入方差自适应模块,能够减轻初始参数设定对参数识别结果的影响,本文基于AUKF提出一种模型更新混合试验方法。对以Bouc-Wen为恢复力模型的防屈曲约束支撑(BRB)进行低周反复加载虚拟试验,通过Matlab编制AUKF算法程序进行参数识别,验证了AUKF算法的高效准确性。对一榀8层4跨带BRB的钢框架进行混合试验数值仿真,结果表明离线模型更新试验结果较在线模型更新更接近真实结果,且简化了试验流程。  相似文献   

An evaluation of Guided Regularized Random Forest for classification and regression tasks in remote sensing     

《International Journal of Applied Earth Observation and Geoinformation》2020

New Earth observation missions and technologies are delivering large amounts of data. Processing this data requires developing and evaluating novel dimensionality reduction approaches to identify the most informative features for classification and regression tasks. Here we present an exhaustive evaluation of Guided Regularized Random Forest (GRRF), a feature selection method based on Random Forest. GRRF does not require fixing a priori the number of features to be selected or setting a threshold of the feature importance. Moreover, the use of regularization ensures that features selected by GRRF are non-redundant and representative. Our experiments based on various kinds of remote sensing images, show that GRRF selected features provides similar results to those obtained when using all the available features. However, the comparison between GRRF and standard random forest features shows substantial differences: in classification, the mean overall accuracy increases by almost 6% and, in regression, the decrease in RMSE almost reaches 2%. These results demonstrate the potential of GRRF for remote sensing image classification and regression. Especially in the context of increasingly large geodatabases that challenge the application of traditional methods.  相似文献   

河北省怀安县朱家洼矿区地球化学特征与找矿方向     

王占彬 《地质与勘探》2020,56(1):102-112

河北怀安朱家洼矿区位于华北板块北缘中段太古宙、元古宙、中生代金银铅锌铁硫铁矿成矿带,为火山热液型金多金属矿。为查明该区成矿规律,明确找矿方向,在区内开展了水系沉积物测量、土壤地球化学测量等工作。通过对元素分布、元素相关性、元素异常等特征研究表明,Au、Mo为本区主成矿元素;各元素异常平面分布具有分带性,高温元素W、Sn、Bi异常位于骆驼山火山机构中心,中低温元素Pb、Zn、As、Ag等异常分布于火山机构边部及周边围岩中,成矿元素Au、Mo异常主要位于火山机构西侧围岩中。异常查证发现金钼矿化体2条,金钼矿化受火山机构和北西向构造带控制。依据成矿地质条件、地球化学异常及查证成果认为,朱家洼矿区Au、Mo成矿潜力大,火山机构西侧围岩区是该区重点找矿地段。  相似文献   

渤海自由生活海洋线虫两个新纪录种     

赵丽萍  乔春艳  陆洋  孙静 《海洋与湖沼》2020,51(1):212-217

在对渤海滨州贝壳堤岛的自由生活海洋线虫进行分类和多样性研究中,发现2个我国新纪录种并进行了描述。其中,澳洲深咽线虫Bathylaimus australis Cobb,1894主要特征为:头刚毛长约20μm,分为4节,顶端膨大;前口腔大,无齿,后口腔小,具小齿;化感器双环形,位于口腔中部位置;交接刺细长,稍向腹面弯曲,近端膨大呈头状,长32-37μm;引带宽大,肾形,长36-40μm,末端角质化,渐尖。古氏努朵拉线虫Nudora gourbaultae Vincx,1989主要特征为:体表具12列纵向排列的V型装饰;第二体环较宽,头刚毛11-15μm(为头颈的67%-81%);化感器圆形,直径4-6μm(为相应体径的29%-38%),位于第二体环上;具双咽球;交接刺细长,弯曲呈S型,长为肛径的1.3-1.5倍;引带等于或长于交接刺,镰刀型,无肛前辅器。  相似文献   

守初心耕海探洋七十载担使命披风踏浪砥砺行——中国科学院海洋研究所70年发展纪实   总被引：1，自引：0，他引：1  

王凡  孙松 《海洋与湖沼》2020,51(4):664-672

中国科学院海洋研究所是新中国第一个专门从事海洋科学研究的国立科研机构,她的70年光辉历程是我国海洋科技事业从无到有、从弱到强的发展缩影,是新中国海洋科学调查研究自主创新发展历程的真实写照。本文简要介绍中国科学院海洋研究所的主要发展历程,回顾70年来取得的主要科技成就,并围绕新形势下建设海洋大科学研究中心等改革发展举措,讨论和展望研究所的未来发展。  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

2013—2019年度海洋科学技术奖计量统计及其科研合作网络分析          下载免费PDF全文

赵晓龙  李保石  王泉斌 《海洋开发与管理》2020,37(11):19-27

文章基于2013—2019年度海洋科学技术奖，运用计量统计、社会网络分析等研究方法，探究海洋科学技术奖获奖成果计量特征、学科分布、获奖机构及其科研合作关系等，直观揭示海洋科学技术奖所构成的科研合作范式、科研合作网络结构等，以期为海洋科研管理、科技创新和学科建设等提供科学参考。研究表明：整体上，海洋科学技术奖获奖成果呈逐年递增趋势，一等奖与二等奖的获奖等级比值呈下降趋势；学科划分上，获奖成果主要隶属于“海洋科学”学科，又以海洋生物学、海洋装备与设备、海洋化学和物理海洋学为主体；获奖机构方面，海洋科学技术奖已奖励包括中国海洋大学和中国科学院海洋研究所等涉海类高校和科研院所在内的各类海洋科技创新主体285家，分布在山东、浙江、广东、上海、北京、江苏等19个省（市、自治区）；科研合作方面，海洋科学技术奖获奖核心机构所构建的科研合作关系紧密，以自然资源部第二海洋研究所的中心度最高，中国海洋大学的中间中心度最高，其控制该科研合作网络中其他机构之间沟通交流的力度最大。  相似文献